Pneumatic capsules tablets medical pneumatic

vacuum conveyor equipment​

Product Description

Vacuum feeder is also called the vacuum conveyor, is a kind of by means of vacuum suction to transmit

granular and powdered materials clean airtight pipeline equipment. Using the vacuum and environmental

pressure difference of the space, form gas flow inside the pipeline, drive the powder material movement,

thus finish powder conveying. Our company introduced advanced foreign vacuum technology, and

constantly improve, continuous improvement. This machine is now widely used in chemical, pharmaceutical,

food, metallurgy, building materials, agricultural and sideline and so on various light and heavy industries

and other industries.

Application

Vacuum feeding machine is mainly used for conveying powder and granular materials, such as API

powder, chemical powder, metal oxide powder, explosive powder;capsules, tablets, pills, small food

particles, powder particles, etc.; It is not suitable for conveying is too wet, sticky materials, overweight.

Feature

Vacuum feeding machine adopts single air as power source. It is intrinsically safe explosion-proof

equipment, can be applied to higher explosion-proof requirements conveying inflammable, explosive

materials. At the same time, because of just use stainless steel tube and soft connection, convenient

installation, repair and maintenance are convenient.

Working Processing

To press the vacuum feeding machine "on/off", the compressed air into the vacuum pump, and the feeding

hopper door shut, driven by the cylinder vacuum hopper. Vacuum feeder under vacuum to form a stream of

air flow in the stream, under the action of materials through the hose is to be delivered to the vacuum in the

hopper, at a certain time (feeding time, adjustable) compressed air have been closed down, pneumatic

vacuum pump vacuum cannot be, at the same time the feeding hopper door in cylinder driven by open,

vacuum feeding machine vacuum disappeared, material automatically from feeding door into the feeding

device (such as tablet machine, packaging machine, etc.), at the same time, stored in a compressed air

blow in the gas bag filters, automatic filter cleaning; After a certain time (feeding time, adjustable), restart

the compressed air, vacuum pneumatic vacuum pump, feeding door closed and the vacuum feeder loading

again, again, the material is continuously sent into the feeding device.

Vacuum feeder to be feeding or loading capacity hours, please check according to the following procedure.

1. The system of gas supply pressure is 0.5-0.6 Mpa. Gas supply pressure is refers to the vacuum generator is working air pressure in the system.

2. Whether the feeding door close.

After long time use, feeding piled up a certain thickness of the powder on the door, door closed lax, vacuum

leakage, should clean the feeding door.

After a long time use, feeding door gasket wear, cause the door closed lax, vacuum leakage, should replace

the sealing ring.

After a long time use, cylinder output and trip fails, a cylinder should be replaced.

3. The filter clogging. After filter with compressed air blowing off, with the mouth blow filter, if very smooth,

filter didn't block; If feel your breath, the filter has been closed, the filter should be changed, or blocked

filters in ultrasonic cleaning machine to clean more than 30 minutes.

4. Material absorption tube were choked up with large materials. Often occur in the stainless steel vacuum

suction nozzle inlet and the entrance of the hopper.

5. The pump head and hopper, hopper between each internode clamp loose, causing system leak, not

loading or loading capacity to reduce.

6. The system failure. Every time the vacuum feeder feeding is stored in the gas bag back pulse

compressed air filter, filter surface is only a thin layer of powder. If the system fails, the filter surface will be

piled up thick powder At the end of the increased resistance to vacuum feeding machine feeding, blow

valve should be replaced at this time.

Please kindly tell us the following answers when you send us inquiry:

1. What kind of grain do you need to process?

2. What is your capacity per hour?

3. What is your local electricity?

For more information on this machine contact us freely by:

E-mail: cnhongyuan at chinavibratingscreen.com

Mob/Whatsapp/Wechat: +8615560250277

Skype: zhu.sunshine

QQ: 70752106

Website: www.chinavibratingscreen.com

Website at Alibaba: hongyuanzd.en.alibaba.com

Name: Grace